Marine electronics near me — Long Island installer.
Looking for marine electronics installation near you on Long Island? LIME serves all of Nassau County and Suffolk County. We come to your marina.
When boat owners search for marine electronics near them on Long Island, they find us. We are a local Long Island marine electronics company — not a national chain, not a big-box store. Our technicians are based here, know the local marinas, and come to your boat.
Why local matters when you search marine electronics near me
A local marine electronics installer who knows Long Island waters makes a real difference. We know the marinas — where the power is, how the slips are laid out, what the typical boat configurations are in Freeport vs Oyster Bay vs Montauk. We know the conditions Long Island boats operate in: saltwater, vibration, UV exposure, and the current demands of running offshore.
We are not a big-box store sending a general electronics technician to your boat. We are marine-specific, NMEA certified, and familiar with the boats and the waters you use.
- Based on Long Island — not a national chain
- NMEA certified marine electronics technicians
- Know Nassau and Suffolk County marinas personally
- Understand Long Island boating conditions
- Mobile service — we come to your boat at your slip
- $280 first hour with travel included — no surprise trip charges
Every marina on Long Island — Nassau and Suffolk County.
We cover all of Long Island, from the western edge of Nassau County to the eastern tip at Montauk. Call 516-448-6221 to confirm availability at your marina.
Nassau — North Shore
Great Neck, Manhasset Bay, Port Washington, Sands Point, Oyster Bay, Cold Spring Harbor, Glen Cove, Sea Cliff, Bayville.
Nassau — South Shore
Freeport, Inwood, Island Park, Long Beach, Oceanside, Baldwin Harbor, Hewlett Bay, Atlantic Beach, Jones Beach Inlet.
Western Suffolk
Huntington Harbor, Northport Bay, Cold Spring Harbor, Lloyd Harbor, Centerport, Half Hollow Hills boat access.
Central Suffolk
Port Jefferson, Mount Sinai, Stony Brook Harbor, Setauket, Patchogue, Bay Shore, Islip, Great South Bay.
Fire Island & South Shore
Fire Island marinas, Babylon, Lindenhurst, Amityville, Copiague, Massapequa — in-slip service available.
East End & Montauk
Southampton, East Hampton, Sag Harbor, Shelter Island, Greenport, Montauk Harbor. We run scheduled East End days during peak season.
Marine electronics service near me — what happens when we come to your boat
Most people searching for marine electronics near them have never had a mobile installer at the slip before. Here is how a visit actually runs, so none of it is a surprise.
Before we come out
Tell us the boat, the marina and the slip, and what the equipment is. A photo of the helm and the model number off the back of the unit beats a long phone call — it lets us bring the right cable, connector and mounting hardware the first time instead of making a second trip for a small part. LIME supplies the parts we install; we do not fit owner-supplied gear.
On the day
We work at your slip — no haul-out, no dropping the boat at a shop. The first hour is flat at $280 for one installer, travel up to 30 minutes each way and setup included, so the hour goes on work rather than on looking around. After that it is $140 an hour in 15-minute steps. A two-man crew is $440, then $220 an hour.
Before we leave
The helm gets powered up and tested with you standing there. We show you what changed, where the new breaker or fuse is, and how to use the unit you just paid for. Labor carries a 60-day warranty; the equipment carries the manufacturer's own.
The honest limits, because they are cheaper to hear now than on the day: we stay on the DC side. House banks, 12- and 24-volt distribution, NMEA 2000 networks and helm wiring are our work. Tying into the vessel's AC panel is a licensed electrician's job, and autopilot drive units or anything that means pulling finished joinery go back to the builder or the dealer — we will say so rather than take it on.
Ready to talk? Or keep reading below.
Project photos from Long Island boats.
Real installations by LIME technicians. Every photo is a completed project on a Long Island boat.
Five-star reviews from Long Island boat owners.
★★★★★
LIME installed a full Simrad NSS setup with Halo radar and Active Target sonar. Perfect install, everything configured before they left the boat. These are real pros — not guys who install and leave you to figure it out.
— Tom B., Mako 284 CC
★★★★★
Had an NMEA 2000 issue no one else could solve. LIME found a bad terminator that was causing intermittent GPS drops. Fixed in two hours. Would have cost me a week chasing the wrong problem.
— Gary M., Albemarle 280
★★★★★
Full helm rebuild — new StarBoard panel, dual Garmin 9" displays, radar, AIS, and autopilot. Cleanest installation I've ever seen on a boat. LIME is in a different league.
— Steve K., Pursuit 325 DC
Long Island boat owners consistently leave LIME 5-star reviews.
Frequently asked questions
Are you actually local to Long Island?
Yes. Long Island Marine Electronics is a Long Island-based business. Our technicians live and work on Long Island. We service marinas across Nassau County and Suffolk County and know the local boating community.
Do you come to my marina or do I need to bring my boat somewhere?
We come to your marina. We are a mobile service company — all work is done at your slip. You don't need to haul the boat or bring it anywhere.
How do I find a marine electronics installer near me on Long Island?
You found us. Call 516-448-6221 or use the quote request form. We'll confirm your marina location and schedule a visit. For your project, that first visit is a normal service call at $280 for the first hour, and we use the hour to work, not just to look.
Do you repair marine electronics near me on Long Island?
Yes. We diagnose and repair chartplotters, VHF radios, fishfinders, AIS units, autopilot systems, and NMEA 2000 networks on Long Island boats. All diagnostics and repairs are done at your slip — no shop drop-off required.
What marine electronics do you install near me on Long Island?
Chartplotters, radar, VHF radio, AIS, autopilot, fishfinders, Starlink, NMEA 2000 networking, and custom dash panels. We install Garmin, Simrad, Raymarine, and Furuno equipment at marinas across Nassau County and Suffolk County.
What should I have ready before you arrive?
The boat's make and model, the marina and slip number, and the model number off whatever you want worked on — it is usually on a sticker on the back of the unit. A photo of the helm and of the wiring behind it helps just as much. With those in hand we load the right parts and finish in one trip instead of two.
Is the price fixed, or do you bill by the hour?
By the hour, always. Everything is time and materials — $280 flat for the first hour, then $140 an hour in 15-minute steps, plus parts at cost and markup. Any figure we give you beforehand is a ballpark of scale, not a locked price. A marina beyond about 30 minutes each way adds $40 per half hour per man, door to door.
Service Area
Marine electronics near me — every town we serve across Long Island.
We come to the boat wherever it sits — dock, mooring, lift or trailer. Pick your town for local detail, or just call 516-448-6221.
Ready to schedule your marine electronics service?
Three ways to reach us: call, text, or submit a quote request online. Usually on your boat within two to three days.
$280 first hour, travel included · $140/hr after · Fair pricing up front