Mobile marine electronics service across Long Island.
We come to your boat at marinas across Nassau County and Suffolk County. NMEA certified technicians · $280 first hour, travel included.
Not every boat can or should leave the water for electronics work. We bring a fully equipped service van to your marina. Whether you need a chartplotter installed, a wiring issue diagnosed, or a full helm rebuild, we do it at your slip — no hauling, no yard time, no hassle.
How mobile marine electronics service works
We schedule a time at your marina, bring everything we need to complete the job, and work at your slip. For most installations, we need shore power access (30A or 50A) and room to work around the helm.
Travel is timed door to door, and the first 30 minutes each way is included in your $280 first hour. Beyond that, travel is $40 per half hour, per man — there’s no separate trip charge.
Before scheduling, we discuss the job by phone so we arrive prepared. For larger jobs like full helm rebuilds or custom panel work, we may come out on a service call first before committing to a schedule.
- We come to your slip — no hauling required
- Fully equipped service vehicle for any job
- Shore power required for most installations
- $280 first hour — travel and setup included
- Nassau County and Suffolk County marinas
- Same NMEA certified service as shop work
We come to you — fully equipped, at your slip.
Our service van carries everything needed for any job. We work at marinas across Nassau County and Suffolk County — Freeport, Babylon, Northport, Port Jefferson, Hampton Bays, and more.
No hauling. No yard fees. No waiting. You schedule, we show up, and we get it done at your boat.
- Fully stocked service van — parts and tools for any job
- NMEA certified technicians on every mobile call
- NMEA 2000 network commissioning done on-site
- Shore power hookup and safety checks included
What we can do at your marina
Almost everything we do in a shop, we can do at your boat. Marine electronics work is highly portable — the same tools and equipment that work at the dock work at our shop.
Installation
- Chartplotter installation and NMEA 2000 wiring
- Radar and AIS installation
- VHF radio and antenna installation
- Autopilot systems
- Transducer installation
- Custom dash panel work
Diagnostics & Service
- Electronics diagnostics and fault finding
- NMEA 2000 network troubleshooting
- Wiring repairs and upgrades
- Display and antenna replacement
- Battery and charging system assessment
Tidewater 28 — marina installation
On-site electronics work
Formula 37ft — wiring at marina
NMEA Certified MEI
ABYC Electrical Standards
Empire Wind NETP Approved
Ready to talk? Or keep reading below.
Frequently asked questions
Do you need shore power to work on my boat at the marina?
Yes, for most installations. Running tools, testing electronics, and charging equipment all require 30A or 50A shore power. If your slip doesn't have power, we can often use a generator — discuss this when you schedule.
How do you handle jobs that take more than one day?
Multi-day jobs are scheduled in advance. We return the next day and continue from where we stopped. Each day starts with the flat first hour, travel included. For large projects like full helm rebuilds, we'll estimate total hours before we start.
Can I get a quote before scheduling?
Yes. Call us at 516-448-6221 and describe the job. For anything beyond a simple swap, we may come out on a service call first so we can give you an accurate estimate — or send photos and model numbers and we will price it at no charge. We don't bill for assessment visits on new jobs.
Is there a minimum charge?
No — there is no 4-hour minimum. Your first hour is a flat $280, which covers travel to your marina (up to 30 minutes each way), setup, and the first hour of work. After that, time is billed at $140/hr in 15-minute steps.
The most trusted marine electronics installer on Long Island.
NMEA certified. ABYC standard. Perfect 5-star rating. Long Island's most credentialed marine electronics installer.
NMEA Certified
ABYC Standard
Empire Wind NETP
Fully Insured
Every review we have ever received is five stars. We earn that by doing the job right — proper NMEA 2000 networks, marine-grade wiring, correct grounding, and installations that hold up at sea, not just at the dock.
Every marina on Long Island — Nassau and Suffolk County.
Nassau — North Shore
Great Neck, Manhasset Bay, Port Washington, Sands Point, Oyster Bay, Cold Spring Harbor, Glen Cove, Sea Cliff, Bayville.
Nassau — South Shore
Freeport, Inwood, Island Park, Long Beach, Oceanside, Baldwin Harbor, Hewlett Bay, Atlantic Beach, Jones Beach Inlet.
Western Suffolk
Huntington Harbor, Northport Bay, Cold Spring Harbor, Lloyd Harbor, Centerport, Half Hollow Hills boat access.
Central Suffolk
Port Jefferson, Mount Sinai, Stony Brook Harbor, Setauket, Patchogue, Bay Shore, Islip, Great South Bay.
Fire Island & South Shore
Fire Island marinas, Babylon, Lindenhurst, Amityville, Copiague, Massapequa — in-slip service available.
East End & Montauk
Southampton, East Hampton, Sag Harbor, Shelter Island, Greenport, Montauk Harbor. We run scheduled East End days during peak season.
Call 516-448-6221 to confirm availability at your specific marina.
More five-star reviews from Long Island boat owners.
★★★★★
LIME installed a full Simrad NSS setup with Halo radar and Active Target sonar. Perfect install, everything configured before they left the boat. These are real pros — not guys who install and leave you to figure it out.
— Tom B., Mako 284 CC
★★★★★
Had an NMEA 2000 issue no one else could solve. LIME found a bad terminator that was causing intermittent GPS drops. Fixed in two hours. Would have cost me a week chasing the wrong problem.
— Gary M., Albemarle 280
★★★★★
Full helm rebuild — new StarBoard panel, dual Garmin 9" displays, radar, AIS, and autopilot. Cleanest installation I've ever seen on a boat. LIME is in a different league.
— Steve K., Pursuit 325 DC
Every review LIME has received is 5 stars. Read more on Google.
Transparent labor rates — no surprises.
LIME publishes labor rates publicly. We believe that transparency builds trust, saves time in the quote process, and allows boat owners to make informed decisions before picking up the phone.
Lead Installer
$140/hr
NMEA Certified rate for all onsite diagnostics, installation, and project work. NMEA 2000 networks, transducer calibration, autopilot commissioning, complex wiring diagnostics.
2nd Installer
$80/hr
For projects requiring two technicians — large display work, confined spaces, or multi-day builds. Efficient two-person crews reduce overall project time.
Service Call
80 first hour
Field work starts with a flat $280 first hour covering travel (up to 30 minutes each way), setup, and the first hour of work at your marina; after that it’s $140/hr in 15-minute steps.
Parts, materials, and equipment are itemized separately on every invoice. For large projects, we go over transparent line-item labor and equipment costs with you up front before we start.
Service Area
Towns we serve across Long Island.
We come to the boat wherever it sits — dock, mooring, lift or trailer. Pick your town for local detail, or just call 516-448-6221.
Ready to schedule your marine electronics service?
Three ways to get started: call, text, or submit a quote request online. We respond same day during the season.
$280 first hour, travel included · $140/hr after · Fair pricing up front
Reach Long Island Marine Electronics.
Phone / Text
Call or text for fastest response. Available throughout the boating season.
Service Area
Nassau County & Suffolk County
Mobile service — we come to your marina, boatyard, or private dock.