26 real installations. Every job on Long Island – marine electronics installation Long Island
Project Gallery — Long Island Marine Electronics

26 real installations. Every job on Long Island.

Project Gallery — Long Island Marine Electronics

Real project photos from completed marine electronics installations — superyachts, government vessels, sportfishers, and center consoles. Every job here is the kind of work described on our marine electronics installation page.

No stock photos. Every image is from an actual job completed by our NMEA certified technicians on Long Island.

Call 516-448-6221
Book Now
Contact Us
Long Island Marine Electronics LIME

Ready to upgrade your boat's electronics?

NMEA certified · ABYC standards · Nassau & Suffolk County

Call 516-448-6221Book NowWhy Choose Us

NMEA
Certified MEI
$140
Per Hour
2
Counties Covered
$280
First Hour

View full pricing →  Why choose us →

Project 01 of 26 · Superyacht

114 ft Burger Superyacht

Full electronics refit on a 114 ft Burger superyacht. Radar, chartplotters, AIS, VSAT, and complete helm wiring rebuilt from scratch.

114 ft Burger Superyacht — helm electronics installation — Long Island Marine Electronics
114 ft Burger Superyacht — chartplotter and radar setup — Nassau County NY
114 ft Burger Superyacht — custom panel wiring — Suffolk County NY
114 ft Burger Superyacht — NMEA 2000 network build — Long Island, New York
114 ft Burger Superyacht — antenna and radar mounting — NMEA certified installer, Long Island
114 ft Burger Superyacht — helm display screens — Long Island, New York
114 ft Burger Superyacht — sonar and depth sounder installation — NMEA certified installer, Long Island
114 ft Burger Superyacht — GPS chartplotter mounting — Long Island Marine Electronics
114 ft Burger Superyacht — AIS transponder and navigation system — Nassau County NY
114 ft Burger Superyacht — marine electronics refit in progress — Suffolk County NY
114 ft Burger Superyacht — complete electronics package — NMEA certified installer, Long Island
114 ft Burger Superyacht — control panel detail — Nassau County NY
114 ft Burger Superyacht — display mounting and wiring — Suffolk County NY
114 ft Burger Superyacht — engine electronics and NMEA sensors — Long Island, New York
114 ft Burger Superyacht — overhead wiring run and cable routing — Long Island Marine Electronics

Project 02 of 26 · Motoryacht

98 Foot Ferretti 1000 Yacht

Marine electronics installation aboard a 98 foot Ferretti Yachts 1000 flybridge — the flagship of the Ferretti Yachts line. Serviced dockside on Long Island.

98 ft Ferretti 1000 motoryacht — marine electronics installation project photo 1 — Long Island Marine Electronics
98 ft Ferretti 1000 motoryacht — marine electronics installation project photo 2 — Long Island Marine Electronics
98 ft Ferretti 1000 motoryacht — marine electronics installation project photo 3 — Long Island Marine Electronics
98 ft Ferretti 1000 motoryacht — marine electronics installation project photo 4 — Long Island Marine Electronics
98 ft Ferretti 1000 motoryacht — marine electronics installation project photo 6 — Long Island Marine Electronics
98 ft Ferretti 1000 motoryacht — marine electronics installation project photo 7 — Long Island Marine Electronics
98 ft Ferretti 1000 motoryacht — marine electronics installation project photo 8 — Long Island Marine Electronics
98 ft Ferretti 1000 motoryacht — marine electronics installation project photo 10 — Long Island Marine Electronics

Project 03 of 26 · Motor Yacht

82 ft Alen Yacht

Full electronics commissioning — twin Garmin helms, Volvo Penta integration, radar, AIS and NMEA 2000 backbone

82 ft Alen yacht alongside at Sag Harbor - yacht electronics installer Sag Harbor Long Island
Alen motor yacht at the Sag Harbor docks during an electronics install - marine electronics Sag Harbor
Alen yacht moored at Sag Harbor on Long Island - yacht electronics Long Island
Garmin multifunction helm with NMEA 2000 device list open on an 82 ft Alen yacht - marine electronics installation Sag Harbor Long Island
Twin Garmin displays and Volvo Penta joystick control at a yacht helm - yacht electronics installer Long Island
Twin Garmin GMS 10 network switches and labeled NMEA 2000 backbone on an equipment panel - marine NMEA 2000 installation Long Island
NMEA 2000 backbone with tees and fused terminal blocks in a yacht equipment locker - boat electronics repair Long Island
Marine electronics equipment panel with network switches and DC distribution - marine electrician Long Island
Labeled marine network wiring and cable management inside an equipment panel - marine electrical Nassau County
S-Link gateway wiring and connector detail on a yacht - marine electronics installation Suffolk County
Garmin NMEA 2000 device list showing VHF 215i AIS and Volvo Penta helm displays - marine NMEA 2000 installation Long Island
NMEA 2000 network device list on a Garmin chartplotter after commissioning - chartplotter installation Long Island
Yacht engine room with marine electrical and electronics installation - marine electronics installation Long Island
Engine room electrical systems on a large motor yacht - marine electrician Nassau County
Engine room wiring and marine electrical distribution on a yacht - marine electrician Long Island
Marine DC wiring runs and cable management in an engine space - boat electrical repair Long Island
Garmin radar dome mounted on a yacht arch - marine radar installation Long Island
Garmin marine radar dome installed above the helm - radar and AIS installation Long Island
Motor yacht at a Sag Harbor dock with the bridge behind - marine electronics Sag Harbor Long Island
Sag Harbor marina and bridge with motor yachts at the docks - marine electronics Sag Harbor Long Island

Project 04 of 26 · Catamaran

77 ft Lagoon Catamaran

Battery and inverter upgrades

77 ft Lagoon Catamaran — control panel detail — Nassau County NY
77 ft Lagoon Catamaran — display mounting and wiring — Suffolk County NY
77 ft Lagoon Catamaran — helm electronics installation — Long Island Marine Electronics
77 ft Lagoon Catamaran — chartplotter and radar setup — Nassau County NY
77 ft Lagoon Catamaran — custom panel wiring — Suffolk County NY
77 ft Lagoon Catamaran — NMEA 2000 network build — Long Island, New York
77 ft Lagoon Catamaran — antenna and radar mounting — NMEA certified installer, Long Island
77 ft Lagoon Catamaran — helm display screens — Long Island, New York
77 ft Lagoon Catamaran — sonar and depth sounder installation — NMEA certified installer, Long Island
77 ft Lagoon Catamaran — AIS transponder and navigation system — Nassau County NY
77 ft Lagoon Catamaran — marine electronics refit in progress — Suffolk County NY
77 ft Lagoon Catamaran — helm rewire and panel fabrication — Long Island, New York
77 ft Lagoon Catamaran — complete electronics package — NMEA certified installer, Long Island

Project 05 of 26 · Motor Yacht

2026 Princess 65

Inverter-charger replacement on a brand-new flybridge yacht at Mill Creek Marina, Sag Harbor: the failed unit out, a new Mastervolt CombiMaster 24 V in with its DC disconnect, and the 24-volt panel confirmed charging before we left. More on our inverter installation page.

2026 Princess 65 at its slip at Mill Creek Marina, Sag Harbor, for an inverter-charger replacement – marine electronics Sag Harbor – Long Island
The failed inverter-charger out of the boat on a moving blanket – inverter replacement, Sag Harbor, Long Island
New Mastervolt CombiMaster 24 V inverter-charger with its DC disconnect on a 2026 Princess 65 at Mill Creek Marina – marine electronics Sag Harbor – Long Island
Wiring terminals on the new Mastervolt CombiMaster inverter-charger – inverter-charger installation, Sag Harbor, Long Island
New Mastervolt CombiMaster installed in the machinery space of a 2026 Princess 65 – inverter-charger installation, Sag Harbor, Long Island
24 V DC panel reading Charging – Absorption after the new inverter-charger went in – Sag Harbor, Long Island

Project 06 of 26 · Sportfisher

62 ft Viking Sportfisher

Complete helm rebuild on a 62 ft Viking sportfisher in Lawrence, NY. Full Garmin package — Cameras, sonar, radar, custom panel fabrication.

62 ft Viking Sportfisher — chartplotter and radar setup — Nassau County NY
Sportfishing boat at her berth – marine electronics installation Long Island
62 ft Viking Sportfisher — autopilot system installation — Nassau County NY
62 ft Viking Sportfisher — clean wiring and cable management — Suffolk County NY
62 ft Viking Sportfisher — helm display screens — Long Island, New York
62 ft Viking Sportfisher — GPS chartplotter mounting — Long Island Marine Electronics
62 ft Viking Sportfisher — AIS transponder and navigation system — Nassau County NY
62 ft Viking Sportfisher — marine electronics refit in progress — Suffolk County NY
62 ft Viking Sportfisher — helm rewire and panel fabrication — Long Island, New York
62 ft Viking Sportfisher — overhead wiring run and cable routing — Long Island Marine Electronics
62 ft Viking Sportfisher — antenna cable routing and connections — Long Island, New York
62 ft Viking Sportfisher — completed installation overview — NMEA certified installer, Long Island
Completed helm install with new marine electronics – marine electronics installation Long Island
Installed helm display and instrument wiring – marine electronics installation Long Island
Electrical distribution panel and bus bars in an equipment locker – marine electronics installation Long Island
Flybridge helm with multiple displays and engine instruments – marine electronics installation Long Island
Helm electronics installed on a boat kept in Patchogue – marine electronics installation Long Island
Engine room electrical panel with breakers and loomed wiring – marine electronics installation Long Island
Professional marine electronics installation project – marine electronics installation Long Island
Installed helm display and instrument wiring – marine electronics installation Long Island
Helm dash masked off and templated for a new display cutout – marine electronics installation Long Island

Project 07 of 26 · Express Cruiser

46 ft Juneau

Stereo and Vhf upgrade

46 ft Juneau — chartplotter and radar setup — Nassau County NY
Amplifier and speaker wiring run under a hardtop – marine electronics installation Long Island
46 ft Juneau — NMEA 2000 network build — Long Island, New York
46 ft Juneau — antenna and radar mounting — NMEA certified installer, Long Island
46 ft Juneau — autopilot system installation — Nassau County NY
46 ft Juneau — clean wiring and cable management — Suffolk County NY
46 ft Juneau — helm display screens — Long Island, New York
46 ft Juneau — AIS transponder and navigation system — Nassau County NY
46 ft Juneau — marine electronics refit in progress — Suffolk County NY
46 ft Juneau — complete electronics package — NMEA certified installer, Long Island
46 ft Juneau — satellite communications setup — Long Island Marine Electronics
46 ft Juneau — control panel detail — Nassau County NY
46 ft Juneau — engine electronics and NMEA sensors — Long Island, New York
46 ft Juneau — finished helm — new electronics installed — NMEA certified installer, Long Island
46 ft Juneau — overhead wiring run and cable routing — Long Island Marine Electronics
Flush-mounted cockpit speakers alongside a teak deck – marine electronics installation Long Island

Project 08 of 26 · Express Cruiser

40 ft Absolute STL

Full electronics package on a 40 ft Absolute express cruiser. Radar arch mount, VHF with hailer, and NMEA 2000 backbone.

40 ft Absolute STL — helm electronics installation — Long Island Marine Electronics
40 ft Absolute STL — chartplotter and radar setup — Nassau County NY
40 ft Absolute STL — custom panel wiring — Suffolk County NY
40 ft Absolute STL — NMEA 2000 network build — Long Island, New York
40 ft Absolute STL — antenna and radar mounting — NMEA certified installer, Long Island
40 ft Absolute STL — VHF radio and navigation suite — Long Island Marine Electronics
40 ft Absolute STL — autopilot system installation — Nassau County NY
40 ft Absolute STL — clean wiring and cable management — Suffolk County NY
40 ft Absolute STL — sonar and depth sounder installation — NMEA certified installer, Long Island
40 ft Absolute STL — GPS chartplotter mounting — Long Island Marine Electronics
40 ft Absolute STL — AIS transponder and navigation system — Nassau County NY
40 ft Absolute STL — marine electronics refit in progress — Suffolk County NY
40 ft Absolute STL — helm rewire and panel fabrication — Long Island, New York
40 ft Absolute STL — complete electronics package — NMEA certified installer, Long Island
40 ft Absolute STL — satellite communications setup — Long Island Marine Electronics
40 ft Absolute STL — control panel detail — Nassau County NY
40 ft Absolute STL — display mounting and wiring — Suffolk County NY
40 ft Absolute STL — engine electronics and NMEA sensors — Long Island, New York
40 ft Absolute STL — finished helm — new electronics installed — NMEA certified installer, Long Island
40 ft Absolute STL — overhead wiring run and cable routing — Long Island Marine Electronics
40 ft Absolute STL — dash panel fabrication — Nassau County NY
40 ft Absolute STL — network backbone installation — Suffolk County NY

17 more galleries below — or get in touch today.

NMEA certified, ABYC standards, fully insured.

Call 516-448-6221Book Now

Project 09 of 26 · Government Vessel

NYPD CTOSS Patrol Vessel

Full electronics install on an NYPD Counter Terrorism 34 ft Safeboat. Mission-critical radar, GPS, and communications for law enforcement.

NYPD CTOSS Patrol Vessel — helm electronics installation — Long Island Marine Electronics
NYPD CTOSS Patrol Vessel — chartplotter and radar setup — Nassau County NY
NYPD CTOSS Patrol Vessel — custom panel wiring — Suffolk County NY
NYPD CTOSS Patrol Vessel — NMEA 2000 network build — Long Island, New York
NYPD CTOSS Patrol Vessel — antenna and radar mounting — NMEA certified installer, Long Island
NYPD CTOSS Patrol Vessel — clean wiring and cable management — Suffolk County NY
NYPD CTOSS Patrol Vessel — AIS transponder and navigation system — Nassau County NY
NYPD CTOSS Patrol Vessel — marine electronics refit in progress — Suffolk County NY
NYPD CTOSS Patrol Vessel — helm rewire and panel fabrication — Long Island, New York
NYPD CTOSS Patrol Vessel — complete electronics package — NMEA certified installer, Long Island
NYPD CTOSS Patrol Vessel — satellite communications setup — Long Island Marine Electronics
NYPD CTOSS Patrol Vessel — control panel detail — Nassau County NY
NYPD CTOSS Patrol Vessel — display mounting and wiring — Suffolk County NY
NYPD CTOSS Patrol Vessel — finished helm — new electronics installed — NMEA certified installer, Long Island
NYPD CTOSS Patrol Vessel — overhead wiring run and cable routing — Long Island Marine Electronics
NYPD CTOSS Patrol Vessel — dash panel fabrication — Nassau County NY
NYPD CTOSS Patrol Vessel — network backbone installation — Suffolk County NY
NYPD CTOSS Patrol Vessel — antenna cable routing and connections — Long Island, New York

Project 10 of 26 · Municipal Vessel

Town of Oyster Bay Vessel

Marine electronics for the Town of Oyster Bay municipal patrol vessel. Inverter and generator and shore power replacement  work to meet government marine standards.

Oyster Bay 2008 safe 29 — Long Island Marine Electronics project
Town of Oyster Bay Vessel — display mounting and wiring — Suffolk County NY
Oyster Bay 2008 safe 29 — Long Island Marine Electronics project
Oyster Bay 2008 safe 29 — Long Island Marine Electronics project
Town of Oyster Bay Vessel — helm electronics installation — Long Island Marine Electronics
Town of Oyster Bay Vessel — chartplotter and radar setup — Nassau County NY
Town of Oyster Bay Vessel — custom panel wiring — Suffolk County NY
Town of Oyster Bay Vessel — NMEA 2000 network build — Long Island, New York
Town of Oyster Bay Vessel — antenna and radar mounting — NMEA certified installer, Long Island
Town of Oyster Bay Vessel — VHF radio and navigation suite — Long Island Marine Electronics
Town of Oyster Bay Vessel — autopilot system installation — Nassau County NY
Town of Oyster Bay Vessel — clean wiring and cable management — Suffolk County NY
Town of Oyster Bay Vessel — helm display screens — Long Island, New York
Town of Oyster Bay Vessel — GPS chartplotter mounting — Long Island Marine Electronics
Town of Oyster Bay Vessel — complete electronics package — NMEA certified installer, Long Island
Town of Oyster Bay Vessel — satellite communications setup — Long Island Marine Electronics
Town of Oyster Bay Vessel — control panel detail — Nassau County NY
Oyster Bay 2008 safe 29 — Long Island Marine Electronics project
Oyster Bay 2008 safe 29 — Long Island Marine Electronics project
Oyster Bay 2008 safe 29 — Long Island Marine Electronics project
Oyster Bay 2008 safe 29 — Long Island Marine Electronics project

Project 11 of 26 · Express Cruiser

Cruisers Inc 3860

Full helm and electronics rebuild on a Cruisers Inc 3860. Garmin chartplotter, radar, autopilot, VHF radio, and complete helm rewire.

Cruisers Inc 3860 — helm electronics installation — Long Island Marine Electronics
Cruisers Inc 3860 — chartplotter and radar setup — Nassau County NY
Cruiser helm with chartplotter, engine gauges and breaker panel – marine electronics installation Long Island
Cruisers Inc 3860 — custom panel wiring — Suffolk County NY
Cruisers Inc 3860 — NMEA 2000 network build — Long Island, New York
Cruisers Inc 3860 — VHF radio and navigation suite — Long Island Marine Electronics
Cruisers Inc 3860 — autopilot system installation — Nassau County NY
Cruisers Inc 3860 — clean wiring and cable management — Suffolk County NY
Cruisers Inc 3860 — GPS chartplotter mounting — Long Island Marine Electronics
Cruisers Inc 3860 — AIS transponder and navigation system — Nassau County NY
Cruisers Inc 3860 — marine electronics refit in progress — Suffolk County NY
Cruisers Inc 3860 — helm rewire and panel fabrication — Long Island, New York
Cruisers Inc 3860 — satellite communications setup — Long Island Marine Electronics
Cruisers Inc 3860 — network backbone installation — Suffolk County NY
Express cruiser helm with the display removed before a new install – marine electronics installation Long Island
Sport boat helm with chartplotter and analog gauges – marine electronics installation Long Island
Express cruiser alongside a Long Island marina dock – marine electronics installation Long Island
Cruisers 3860 express cruiser – marine electronics installation, Long Island
Cruisers 3860 express cruiser – marine electronics installation, Long Island
NMEA 2000 backbone install on client vessel – marine electronics installation Long Island
NMEA 2000 backbone wiring on a boat serviced in Huntington Bay – marine electronics installation Long Island
Helm display and instrument cluster after commissioning – marine electronics installation Long Island
Professional marine electronics installation project – marine electronics installation Long Island
Dash cutouts prepared during a helm electronics refit – marine electronics installation Long Island

Project 12 of 26 · Center Console

Pursuit 3370

Chartplotter, autopilot, and sonar install on a 2004 Pursuit 3370. Garmin NMEA 2000 network with depth sounder, radar dome, and VHF antenna.

Pursuit 3370 — custom panel wiring — Suffolk County NY
Pursuit 3370 — NMEA 2000 network build — Long Island, New York
Pursuit 3370 — completed installation overview — NMEA certified installer, Long Island
Pursuit 3370 — antenna and radar mounting — NMEA certified installer, Long Island
Pursuit 3370 — VHF radio and navigation suite — Long Island Marine Electronics
Pursuit 3370 — autopilot system installation — Nassau County NY
Pursuit 3370 — clean wiring and cable management — Suffolk County NY
Pursuit 3370 — sonar and depth sounder installation — NMEA certified installer, Long Island
Pursuit 3370 — helm rewire and panel fabrication — Long Island, New York
Pursuit 3370 — satellite communications setup — Long Island Marine Electronics
Pursuit 3370 — finished helm — new electronics installed — NMEA certified installer, Long Island
Pursuit 3370 — overhead wiring run and cable routing — Long Island Marine Electronics
Pursuit 3370 — network backbone installation — Suffolk County NY
Pursuit 3370 — antenna cable routing and connections — Long Island, New York

12 more galleries below — or get in touch today.

NMEA certified, ABYC standards, fully insured.

Call 516-448-6221Book Now

Project 13 of 26 · Walkaround

Starlink Mini install — hardtop mount beside the radar, SeaView watertight cable gland, fused 12-volt power with a Bluetooth on/off switch, wiring hidden behind the headliner. Merrick, Long Island. More on our Starlink for boats page.

Boston Whaler 325 Conquest hardtop with a Starlink Mini mounted beside the radar dome – Starlink for boats installation, Merrick, Long Island
Starlink Mini mounted on a Boston Whaler 325 Conquest hardtop – Starlink for boats installation, Merrick, Long Island
Starlink Mini dish on its stainless hardtop mount – Starlink for boats installation, Long Island
12-volt Starlink power wiring with Bluetooth on/off switch behind the helm – Starlink boat installation, Long Island

Project 14 of 26 · Center Console

Tidewater 28

Chartplotter and sonar on a 2018 Tidewater 28 CC. Garmin GPSMAP with outboard integration and clean panel wiring.

Tidewater 28 — helm electronics installation — Long Island Marine Electronics
Tidewater 28 — NMEA 2000 network build — Long Island, New York
Center console helm with twin Simrad displays and VHF – marine electronics installation Long Island
Twin Simrad multifunction displays fitted at a center console helm – marine electronics installation Long Island
Tidewater 28 — clean wiring and cable management — Suffolk County NY
Tidewater 28 — helm display screens — Long Island, New York
Tidewater 28 — engine electronics and NMEA sensors — Long Island, New York
Rear of the console showing amplifier and loomed wiring – marine electronics installation Long Island
Console access hatch with bus bars, fuse blocks and labelled wiring – marine electronics installation Long Island
Center console helm with twin Simrad displays and switch panel – marine electronics installation Long Island
Simrad chartplotter and radar displays at the helm – marine electronics installation Long Island

Project 15 of 26 · Center Console

23 ft Sailfish

Full electronics refit on a 23 ft Sailfish center console. New overhead mount box, switches and switch panel, chartplotter, VHF, depth sounder,  trolling motor mount, motor, and battery integration.

23 ft Sailfish — chartplotter and radar setup — Nassau County NY
23 ft Sailfish — custom panel wiring — Suffolk County NY
Helm electronics installed on a boat kept in West Babylon – marine electronics installation Long Island
23 ft Sailfish — antenna and radar mounting — NMEA certified installer, Long Island
23 ft Sailfish — clean wiring and cable management — Suffolk County NY
23 ft Sailfish — GPS chartplotter mounting — Long Island Marine Electronics
23 ft Sailfish — marine electronics refit in progress — Suffolk County NY
23 ft Sailfish — helm rewire and panel fabrication — Long Island, New York
23 ft Sailfish — complete electronics package — NMEA certified installer, Long Island
23 ft Sailfish — satellite communications setup — Long Island Marine Electronics
23 ft Sailfish — control panel detail — Nassau County NY
23 ft Sailfish — engine electronics and NMEA sensors — Long Island, New York
23 ft Sailfish — finished helm — new electronics installed — NMEA certified installer, Long Island
23 ft Sailfish — overhead wiring run and cable routing — Long Island Marine Electronics
23 ft Sailfish — antenna cable routing and connections — Long Island, New York
23 ft Sailfish — completed installation overview — NMEA certified installer, Long Island

Project 16 of 26 · Fleet Rewire

Three 23 ft Bayliners

Three identical boats in Sag Harbor, one job each: the old automotive fuse blocks came out, every circuit was traced and tagged, and each boat got a Blue Sea 5054 circuit-breaker block with printed labels, so the fleet matches and any breaker can be found in the dark. More on our marine electrician page.

Old automotive fuse block with a bundle of yellow negatives on one feed stud, before the rewire – marine electrician Long Island
Every wire on the old fuse block tagged with a printed label before it came out – boat rewire, Sag Harbor, Long Island
New Blue Sea 5054 circuit-breaker block held beside the old fuse block it replaces on a 23 ft Bayliner – marine electrician Long Island
Blue Sea 5054 circuit-breaker block wired and installed behind the dash of a 23 ft Bayliner – boat rewire, Sag Harbor, Long Island
Blue Sea 5054 breaker block with every circuit on a printed label – boat wiring by a marine electrician, Sag Harbor, Long Island
New circuit-breaker block mounted under the dash of a 23 ft Bayliner – marine electronics Sag Harbor – Long Island
Third of three matching breaker-block installs, on a 23 ft Bayliner in Sag Harbor – boat rewire, Long Island
Bayliner 23 helm after the breaker-block rewire – marine electronics Sag Harbor – Long Island

Project 17 of 26 · Express Cruiser

Juneau Project

Electronics installation on a Juneau — Long Island 2020. Full navigation suite with chartplotter, radar, spotlight integration.

Juneau Project — marine electronics refit in progress — Suffolk County NY
Juneau Project — custom panel wiring — Suffolk County NY
Juneau Project — NMEA 2000 network build — Long Island, New York
Juneau Project — antenna and radar mounting — NMEA certified installer, Long Island
Juneau Project — VHF radio and navigation suite — Long Island Marine Electronics
Juneau Project — autopilot system installation — Nassau County NY
Juneau Project — AIS transponder and navigation system — Nassau County NY
Juneau Project — helm rewire and panel fabrication — Long Island, New York
Juneau Project — complete electronics package — NMEA certified installer, Long Island
Juneau Project — satellite communications setup — Long Island Marine Electronics
Juneau Project — display mounting and wiring — Suffolk County NY
Juneau Project — engine electronics and NMEA sensors — Long Island, New York
Juneau Project — overhead wiring run and cable routing — Long Island Marine Electronics
Juneau Project — dash panel fabrication — Nassau County NY
Juneau Project — network backbone installation — Suffolk County NY

Project 18 of 26 · Sport Cruiser

Pursuit 3400

Stereo and amplifier upgrades throughout 

Pursuit 3400 — helm electronics installation — Long Island Marine Electronics
Pursuit 3400 — chartplotter and radar setup — Nassau County NY
Pursuit 3400 — custom panel wiring — Suffolk County NY
Pursuit 3400 — NMEA 2000 network build — Long Island, New York
Pursuit 3400 — antenna and radar mounting — NMEA certified installer, Long Island
Pursuit 3400 — VHF radio and navigation suite — Long Island Marine Electronics
Pursuit 3400 — autopilot system installation — Nassau County NY
Pursuit 3400 — clean wiring and cable management — Suffolk County NY
Pursuit 3400 — helm display screens — Long Island, New York
Pursuit 3400 — sonar and depth sounder installation — NMEA certified installer, Long Island
Pursuit 3400 — GPS chartplotter mounting — Long Island Marine Electronics
Pursuit 3400 — AIS transponder and navigation system — Nassau County NY
Pursuit 3400 — marine electronics refit in progress — Suffolk County NY
Pursuit 3400 — helm rewire and panel fabrication — Long Island, New York
Pursuit 3400 — complete electronics package — NMEA certified installer, Long Island
Pursuit 3400 — satellite communications setup — Long Island Marine Electronics
Pursuit 3400 — control panel detail — Nassau County NY
Pursuit 3400 — display mounting and wiring — Suffolk County NY
Pursuit 3400 — engine electronics and NMEA sensors — Long Island, New York
Pursuit 3400 — finished helm — new electronics installed — NMEA certified installer, Long Island

Project 19 of 26 · Center Console

Intrepid 32

Electronics upgrade on a 32 ft Intrepid. Garmin GPSMAP, FLIR thermal, VHF radio, an new switches and switchplate

Intrepid 32 — complete electronics package — NMEA certified installer, Long Island
Intrepid 32 — marine electronics refit in progress — Suffolk County NY
Intrepid 32 — GPS chartplotter mounting — Long Island Marine Electronics
Intrepid 32 — helm electronics installation — Long Island Marine Electronics
Intrepid 32 — custom panel wiring — Suffolk County NY
Intrepid 32 — clean wiring and cable management — Suffolk County NY
Intrepid 32 — helm display screens — Long Island, New York
Intrepid 32 — sonar and depth sounder installation — NMEA certified installer, Long Island
Intrepid 32 — AIS transponder and navigation system — Nassau County NY
Intrepid 32 — satellite communications setup — Long Island Marine Electronics
Intrepid 32 — autopilot system installation — Nassau County NY

7 more galleries below — or get in touch today.

NMEA certified, ABYC standards, fully insured.

Call 516-448-6221Book Now

Project 20 of 26 · Express Cruiser

Cobalt 302

Electronics upgrade on a 2007 Cobalt 302. New Volo Penta gauges  and new gauges along with new switches, panels, speakers, amplifier and lumitec underwater lights

Cobalt 302 — autopilot system installation — Nassau County NY
Cobalt 302 — helm display screens — Long Island, New York
Cobalt 302 — complete electronics package — NMEA certified installer, Long Island
Cobalt 302 — chartplotter and radar setup — Nassau County NY
Cobalt 302 — antenna and radar mounting — NMEA certified installer, Long Island
Cobalt 302 — sonar and depth sounder installation — NMEA certified installer, Long Island
Cobalt 302 — GPS chartplotter mounting — Long Island Marine Electronics
Cobalt 302 — AIS transponder and navigation system — Nassau County NY
Cobalt 302 — marine electronics refit in progress — Suffolk County NY
Cobalt 302 — helm rewire and panel fabrication — Long Island, New York
Cobalt 302 — satellite communications setup — Long Island Marine Electronics
Cobalt 302 — control panel detail — Nassau County NY
Cobalt 302 — display mounting and wiring — Suffolk County NY
Cobalt 302 — engine electronics and NMEA sensors — Long Island, New York
Cobalt 302 — finished helm — new electronics installed — NMEA certified installer, Long Island

Project 21 of 26 · Motoryacht

56 ft Aicon Motoryacht

Full electronics on a 56 ft Aicon motoryacht. Complete navigation, entertainment, and communication suite across multiple helm stations.

56 ft Aicon Motoryacht — chartplotter and radar setup — Nassau County NY
56 ft Aicon Motoryacht — antenna and radar mounting — NMEA certified installer, Long Island
56 ft Aicon Motoryacht — VHF radio and navigation suite — Long Island Marine Electronics
56 ft Aicon Motoryacht — sonar and depth sounder installation — NMEA certified installer, Long Island
56 ft Aicon Motoryacht — GPS chartplotter mounting — Long Island Marine Electronics
56 ft Aicon Motoryacht — AIS transponder and navigation system — Nassau County NY
56 ft Aicon Motoryacht — control panel detail — Nassau County NY
56 ft Aicon Motoryacht — display mounting and wiring — Suffolk County NY
56 ft Aicon Motoryacht — engine electronics and NMEA sensors — Long Island, New York
56 ft Aicon Motoryacht — finished helm — new electronics installed — NMEA certified installer, Long Island
56 ft Aicon Motoryacht — overhead wiring run and cable routing — Long Island Marine Electronics
56 ft Aicon Motoryacht — network backbone installation — Suffolk County NY
56 ft Aicon Motoryacht — antenna cable routing and connections — Long Island, New York
56 ft Aicon Motoryacht — completed installation overview — NMEA certified installer, Long Island

Project 22 of 26 · Express Cruiser

Formula 37 ft

Multi-display Garmin installation on a Formula 37. Triple MFDs networked together, radar, autopilot, and NMEA 2000 engine data integration.

Formula 37 ft — custom panel wiring — Suffolk County NY
Formula 37 ft — completed installation overview — NMEA certified installer, Long Island
Formula 37 ft — NMEA 2000 network build — Long Island, New York
Formula 37 ft — antenna and radar mounting — NMEA certified installer, Long Island
Formula 37 ft — autopilot system installation — Nassau County NY
Formula 37 ft — sonar and depth sounder installation — NMEA certified installer, Long Island
Formula 37 ft — GPS chartplotter mounting — Long Island Marine Electronics
Formula 37 ft — AIS transponder and navigation system — Nassau County NY
Formula 37 ft — satellite communications setup — Long Island Marine Electronics
Formula 37 ft — display mounting and wiring — Suffolk County NY
Formula 37 ft — engine electronics and NMEA sensors — Long Island, New York
Formula 37 ft — finished helm — new electronics installed — NMEA certified installer, Long Island
Formula 37 ft — network backbone installation — Suffolk County NY
Formula 37 ft — antenna cable routing and connections — Long Island, New York

Project 23 of 26 · Bowrider

Checkmate 27

Wiring and electronics on a 2010 Checkmate 27. New helm panel, chartplotter, VHF radio, and marine-grade wiring harness.

Checkmate 27 — helm electronics installation — Long Island Marine Electronics
Checkmate 27 — chartplotter and radar setup — Nassau County NY
Checkmate 27 — antenna and radar mounting — NMEA certified installer, Long Island
Checkmate 27 — VHF radio and navigation suite — Long Island Marine Electronics
Checkmate 27 — autopilot system installation — Nassau County NY
Checkmate 27 — clean wiring and cable management — Suffolk County NY
Checkmate 27 — helm display screens — Long Island, New York
Checkmate 27 — marine electronics refit in progress — Suffolk County NY
Checkmate 27 — helm rewire and panel fabrication — Long Island, New York
Checkmate 27 — complete electronics package — NMEA certified installer, Long Island
Checkmate 27 — engine electronics and NMEA sensors — Long Island, New York

Project 24 of 26 · Center Console

Grady White 228 Seafarer

Complete electronics refit on a 2005 Grady White 228 Seafarer. Garmin chartplotter, VHF, depth sounder, and clean antenna wiring.

Grady White 228 Seafarer — custom panel wiring — Suffolk County NY
Grady White 228 Seafarer — helm electronics installation — Long Island Marine Electronics
Center console boat in the shop during a hardtop electronics fit-out – marine electronics installation Long Island
Grady White 228 Seafarer — antenna and radar mounting — NMEA certified installer, Long Island
Grady White 228 Seafarer — VHF radio and navigation suite — Long Island Marine Electronics
Grady White 228 Seafarer — autopilot system installation — Nassau County NY
Grady White 228 Seafarer — clean wiring and cable management — Suffolk County NY
Grady White 228 Seafarer — AIS transponder and navigation system — Nassau County NY
Grady White 228 Seafarer — satellite communications setup — Long Island Marine Electronics
Grady White 228 Seafarer — control panel detail — Nassau County NY
Grady White 228 Seafarer — display mounting and wiring — Suffolk County NY
Grady White 228 Seafarer — overhead wiring run and cable routing — Long Island Marine Electronics
Grady White 228 Seafarer — dash panel fabrication — Nassau County NY
Grady White 228 Seafarer — finished helm — new electronics installed — NMEA certified installer, Long Island
Grady White 228 Seafarer — network backbone installation — Suffolk County NY

Project 25 of 26 · Bass Boat

Stratos 201

Electronics install on a Stratos 201 bass boat. Chartplotter, depth sounder, and clean helm wiring on a compact freshwater rig.

Stratos 201 — helm electronics installation — Long Island Marine Electronics
Stratos 201 — control panel detail — Nassau County NY
Stratos 201 — chartplotter and radar setup — Nassau County NY
Stratos 201 — marine electronics refit in progress — Suffolk County NY
Stratos 201 — antenna and radar mounting — NMEA certified installer, Long Island
Stratos 201 — VHF radio and navigation suite — Long Island Marine Electronics
Stratos 201 — autopilot system installation — Nassau County NY
Stratos 201 — helm display screens — Long Island, New York
Stratos 201 — sonar and depth sounder installation — NMEA certified installer, Long Island
Stratos 201 — GPS chartplotter mounting — Long Island Marine Electronics
Stratos 201 — AIS transponder and navigation system — Nassau County NY
Stratos 201 — helm rewire and panel fabrication — Long Island, New York
Stratos 201 — complete electronics package — NMEA certified installer, Long Island
Stratos 201 — satellite communications setup — Long Island Marine Electronics
Stratos 201 — engine electronics and NMEA sensors — Long Island, New York
Stratos 201 — finished helm — new electronics installed — NMEA certified installer, Long Island
Bass boat with Yamaha VMAX outboard tied at the dock – marine electronics installation Long Island
Stratos 201 — overhead wiring run and cable routing — Long Island Marine Electronics

Project 26 of 26 · Commercial Vehicle

Conescan Mobile CBCT Unit

Electrical systems build-out for a Conescan mobile CBCT scanning unit. Victron MultiPlus II inverter, Xantrex Freedom SW, and complete shore power integration for a mobile medical scanning vehicle.

Conescan Mobile CBCT Unit — autopilot system installation — Nassau County NY
Conescan Mobile CBCT Unit — chartplotter and radar setup — Nassau County NY
Conescan Mobile CBCT Unit — custom panel wiring — Suffolk County NY
Conescan Mobile CBCT Unit — NMEA 2000 network build — Long Island, New York
Conescan Mobile CBCT Unit — antenna and radar mounting — NMEA certified installer, Long Island
Conescan Mobile CBCT Unit — clean wiring and cable management — Suffolk County NY
Conescan Mobile CBCT Unit — helm display screens — Long Island, New York
Conescan Mobile CBCT Unit — sonar and depth sounder installation — NMEA certified installer, Long Island
Conescan Mobile CBCT Unit — GPS chartplotter mounting — Long Island Marine Electronics
Conescan Mobile CBCT Unit — AIS transponder and navigation system — Nassau County NY
Conescan Mobile CBCT Unit — marine electronics refit in progress — Suffolk County NY
Conescan Mobile CBCT Unit — helm rewire and panel fabrication — Long Island, New York
Conescan Mobile CBCT Unit — complete electronics package — NMEA certified installer, Long Island
Conescan Mobile CBCT Unit — control panel detail — Nassau County NY
Conescan Mobile CBCT Unit — display mounting and wiring — Suffolk County NY
Conescan Mobile CBCT Unit — engine electronics and NMEA sensors — Long Island, New York
Conescan Mobile CBCT Unit — finished helm — new electronics installed — NMEA certified installer, Long Island
Conescan Mobile CBCT Unit — overhead wiring run and cable routing — Long Island Marine Electronics
Conescan Mobile CBCT Unit — dash panel fabrication — Nassau County NY
Conescan Mobile CBCT Unit — network backbone installation — Suffolk County NY
Conescan Mobile CBCT Unit — antenna cable routing and connections — Long Island, New York

More Ways LIME Can Help

Whether you need one install or a full electronics refit, we're the call you make.
Serving all of Long Island — Nassau and Suffolk County, out to Sag Harbor and the East End.

THE WEBSITE

RELATED SERVICES

Want this quality of work on your boat?

NMEA certified. ABYC standard wiring. Serving Nassau County and Suffolk County marinas.
We show up, we do the job right, and we stand behind our work.

Call 516-448-6221Book NowView Pricing